 |
Electroplater |
| An Export Management Company |
Home | What's New | Products & Services | Feedback | Request a Quotation | Place Order | Links | Site Map
Electroplater |
|||
| Since alpha
particles are easily absorbed, alpha spectrometry relies upon ultra-thin
sample depositions for optimum resolution. The Electroplater
enables a thin, evenly deposited mono-layer to be consistently plated
upon a stainless steel, or platinum, planchet. High resolution allows
separation of the alpha energy peaks and better isotope identification.
The Electroplater offers: |
|
||
|
|||
|
|
Simple
Apparatus Construction
Disposable electrodeposition cells are constructed from 20 mL polyethylene liquid scintillation vials with the bottom removed. A 0.75 inch diameter polished stainless steel planchet is inserted in the cap with the polished side facing inside the vial. The caps have a 5/8 inch diameter hole drilled in them to allow contact with the ground tab of the electroplater. |
||
| Electroplaters
are offered in 4, 6, 8 and 12 station configurations and include a 50/60
Hz, 100/125 volt ac power supply which provides regulated dc current for the
plating operation. Also available with a 50/60 Hz, 220/240 volt ac power
supply with a universal line cord socket on special order.
(Note: for customers outside the USA, the electroplater is available WITHOUT power supply so you may obtain a 12 to 15 volt DC power supply @ 15/25 A that will work with your local electrical power) |
|
||
| Specifications | |||
| Model
number
EP-4 EP-6 EP-8 EP-12 |
Width
(inches)
18 27 36 48 |
Shipping
Weight (lbs)
39 49 70 100 |
DC Amperes
15 15 25 25 |
| Delivery is
30 to 60 days, after receipt of order and appropriate payment terms.
E-mail us for prices. Platinum electrodes are NOT included and are the
responsibility of the user. Prices are subject to change without notice.
Note: Each Platinum electrode requires a 25cm long x 1.3mm diameter and 99.5% or better purity platinum wire. |
|
